CSWIP Welding Inspector (Weekend)

Is it for me?

This is a weekend course. Depending on the location of the course, the training will be delivered every Saturday for four weeks with the examination on the fifth Saturday OR alternatively, if the training is scheduled on the Saturday and Sunday for two weeks (4 days training in total), the examination will be on the third Saturday.

The CSWIP Welding Inspector course is designed for you as an inspection engineer or supervisory staff member. If you have little or no previous welding experience you are advised to attend the Certificate in Visual Inspection of Welds course to prepare for this one.

Person inspecting the inside of a pipe for defects — Inspecting the inside of a pipe for defects

Person measuring the weld reinforcement on a pipe — Inspecting the inside of a pipe for defects

What will I learn?

This course will teach you the duties and responsibilities of a welding inspector, including fusion welding processes, typical weld defects, types of steel (including carbon-manganese, low alloy and stainless steels), the hardening of steels, weldability, heat treatment, and parent metal defects. The programme also includes visual inspection, the testing of parent metals and welds, and destructive and non-destructive test techniques. You will also learn welder and procedure approval, codes and standards, and an outline of safe working practices.

There will also be the opportunity to practice examination questions while undergoing continuous and end-of-course assessment. If you meet the CSWIP requirements for eligibility, you will be able to complete the relevant CSWIP examination on day 5 of the course.

In addition, you can purchase TWI’s online CSWIP Welding Inspector Pre-Learning package which prepares them for the course.

What will I leave with?

To understand factors which influence the quality of fusion welds in steels
To recognise characteristics of commonly used welding processes in relation to quality control
To interpret drawing instructions and symbols to ensure that specifications are met
To set up and report on inspection of welds, macrosections and other mechanical tests
To assess and report on welds to acceptance levels
To confirm that incoming material meets stipulated requirements and recognise the effects on weld quality of departure from specification
To be in a position to pass the Welding Inspector examinations

What else should I know?

Please note:

CSWIP Welding Inspector examination - All candidates must attend a CSWIP approved course of training prior to examination. Enrolment on this course does not constitute reservation of an examination. All courses may be followed by a CSWIP Welding Inspector examination for candidates with appropriate experience - as specified in CSWIP document WI-6-92
In addition, candidates can purchase TWI’s online CSWIP Welding Inspector Pre-Learning package which prepares them for the course
All CSWIP documents are available at www.cswip.com.

ENTRY REQUIREMENTS

Welding Inspector for a minimum of 3 years with experience related to the duties and responsibilities listed in Clause 1.2.2 of CSWIP document WI-6-92, under qualified supervision, independently verified OR
Certified Visual Welding Inspector for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1 and 1.2.2 of CSWIP document WI-6-92 OR
Welding Instructor or Welding Foreman/Supervisor for a minimum of one year

In addition to all the above, candidates must comply with Clause 1.3.4 of document WI-6-92 available at www.cswip.com

All experience will need to be verified by either your previous/present employer/company.

Book your place on the course

Now you've found your course, next find a location and a time.

Check course schedule

Part of:

Welding Inspection

View Programme Overview

TWI Global

CSWIP Welding Inspector Weekend