Is it for me?

 

 

Alternating current field measurement (ACFM) is an electromagnetic inspection technique for the detection and sizing of surface breaking cracks in metallic components and welds. This NDT technique combines the advantages of the alternating current potential drop (ACPD) technique and Eddy Current Testing (ECT).

This course is designed for you if you are a currently or previously approved 3.4U Inspection Controller, a currently or previously approved CSWIP 3.1U or 3.2U Diver, a surface practitioner certificated under PCN or CSWIP, or qualified in a relevant engineering science.

What will I learn?

This course will provide you with an overview of NDT techniques, electrical and electromagnetic theory, ACFM detection - identification of cracks, weld inspection by ACFM techniques, sizing for length and depth, reporting, and backing-up data.

This training is in accordance with the requirements of ISO 9712 and ends with the certification examination.

What will I leave with?

By the end of the course you should be able to:

  • Explain the theoretical principles
  • Carry out equipment functioning checks
  • Locate and size surface breaking fatigue cracks on uncoated and coated steel welds
  • Gain eligibility to sit CSWIP EMD examinations

Certification

CSWIP Logo

What else should I know?

Please note proof of experience and identity will be required prior to the training The candidate can only attempt one examination as part of the package.

ENTRY REQUIREMENTS
  • Be a current or previously approved 3.3U ROV pilot observer OR
  • Be a current or previously approved 3.4U Inspection Controller OR
  • Be a current or previously approved CSWIP 3.1U or 3.2U Diver OR
  • Be a surface practitioner certified under PCN or CSWIP OR
  • Have a qualification in a relevant engineering science
ISO 9712:2022, the standard to which the PCN Scheme operates with respect to NDT certification, now requires that all candidates demonstrate a prior understanding of materials and processes, also known as 'product technology', before undertaking training in any method in order to supplement their knowledge of the specific methods and techniques to which they are seeking certification.
To meet this requirement, BINDT developed the Product Technology training course to help PCN candidates achieve the required materials and processes knowledge in an affordable and convenient way and at a time and pace that suits them.
The course is mandatory for all new PCN candidates https://www.bindt.org/Certification/product-technology-online-training/

Important Note: Whilst not a formal prerequisite, it is highly recommended that candidates have some prior industrial exposure to the method itself as well as to the sector that they will be attempting (e.g. welds). Where this is not possible, candidates are advised to thoroughly review the course notes and complete the relevant product technology e-learning (and methods e-learning where this is available) prior to attending the classroom training.

This preparation will significantly ease their study during the classroom sessions and improve their chances of successfully passing the examinations.

IMPORTANT INFORMATION
Before booking online, please ensure that you meet the entry requirements as verification will be requested when the online booking is complete.

Book your place on the course

Now you've found your course, next find a location and a time.

Check course schedule